It does not take rocket science to understand how you need to paint your floor. It could be as simple as applying nail polish but you need to follow certain steps. You can impart your wooden floors brand new look by painting them using metallic epoxy floor paint. It will give a new lease of life to them and you will also enjoy and learn in the process. Here in this article the process of painting floor is explained so that you can understand the whole idea.
Set up the surface
First of all you need to prepare the surface before application of polyaspartic garage floor coatings so that it can absorb and take up the primer. You need to use sandpaper for the same because sandpaper scrubbing will roughen up the surface and then your floor will be able to soak up. If you want then visit us. You can use 150-grit sandpaper for the same or any other sandpaper that suits your floor. You should get yourself metallic epoxy floor kits for the process.
Clean up the floor
This is one of the most important steps while you are doing the whole process of painting the floor. Vacuum it, use water to wash or better you can use wooden floor cleaner as well. Make sure that the floor is completely dry before following the next step. If you want epoxy floor coatings for concrete then visit us. You may want to leave the floor to dry for around 2 days or so.
Apply the primer
The next step would be to apply the primer on the floor surface you need to paint. The primer should be of good quality and you can use brush or roll to apply the primer. A good latex primer can serve the purpose well but you can use penetrating oil based primer also. After applying the primer, let it dry for at least 24 hours or may be overnight.
Sand it again
Although it may sound a bit peculiar but you need to sand up the wooden surfaces that you need to paint once again. You need to use 220-grit sandpaper this time so that sanding is fine and you get superior results. After sanding it, you need to again clean the surfaces with vacuum and cloth so that nothing is left behind.
Apply the color
Now is the time to apply color and you need to do it very carefully. You can either use brush or roller but whatever you use make sure no bubbles are formed. Do it slowly and decide where to start and end otherwise you may be stuck in corner.
Take the time to dry
Once you apply base coat, leave the floor to dry out. Utilize the best metallic epoxy floor kits for best results. Once the floor is dry you need to coat again so that you get the professional finish.
patrickantonious 